Aruba S1500 Series, Installation Manual

Page: 17 / 36

Aruba S1500 Series Mobility Access Switch | Installation Guide Installation | 17
Chapter 2
Installation
This chapter describes how to install the Aruba S1500 Mobility Access Switch using the mounting options
available. The S1500 accessory kit includes the equipment required to install the Mobility Access Switch in a
standard, two-point 19-inch telco rack. Additional mounting options are sold separately.
This chapter describes the following sections:

“Precautions” on page 17

“Selecting a Location” on page 18

“Installation Recommendation (Only for the S1500-12P Model)” on page 18

“Rack Mount Installation- Standard” on page 18

“Rack Mount Installation- Mid” on page 21

“Wall Mount Installation” on page 24

“Magnet Mount Installation (Only for the S1500-12P Model)” on page 27

“Table or Shelf Installation” on page 29

“Connecting and Disconnecting the AC Power Cord” on page 30

“Installing an SFP” on page 31
Precautions

Ensure that the rack is correctly and securely installed to prevent it from falling or becoming unstable.

Dangerous voltage above 240VAC is always present while the Aruba Power Supply Module is plugged
into an electrical outlet. Remove all rings, jewelry, and other potentially conductive material before
working with this device.

Never insert foreign objects into the chassis, power supply, or any other component, even when the
power supply is turned Off, unplugged, or removed.

Ensure that the main power is fully disconnected from the Mobility Access Switch by unplugging all
power cords from their outlets. For safety, verify that the power outlets and plugs are easily reachable
by the operator.

Do not handle electrical cables which are not insulated. This also includes network cables.

Keep water and other fluids away from the device to minimize electrical hazards.

Comply with electrical grounding standards during all phases of installation and operation of the
product. Do not allow the Mobility Access Switch’s chassis, network ports, power supply, or mounting
brackets to contact any device, cable, object, or person attached to a different electrical ground. Also,
never connect the device to external storm grounding sources.

Perform installation or removal of the chassis or any module in a static-free environment. Proper use of
anti-static body straps and mats is strongly recommended.

Modules must be kept in anti-static packaging when not installed in the chassis.
!
CAUTION
Installation of the device should be performed by a trained installation professional.