Aruba MSR4K43N0, Installation Manual

Page: 13 / 43

12 MSR4000 Installation Guide
Figure 1-4 MSR4KAC LED Layout
The following table lists the meanings of the LEDs on the MSR4KAC:
Table 1-2 MSR4KAC LED status indicators
LED Function Indicator Status
P/S Power
Off No power to device
On (Amber)
Device has power but does not yet have a
mesh network routing path to a gateway
(portal) node
On (Green)
Device has power and has found a mesh
network routing path to a gateway (portal)
node
POE
Displays PSE power
output status
Off
Non-powered device (0
Ω<Rport<200Ω) or
Port open (Rport>1M
Ω)
Green
Port on (25k
Ω)
•
1 Flash: Low signature resistance
(300
Ω<Rport<
15k
Ω
)
•
2 Flashes: High signature resistance
(33k
Ω<Rport<
500k
Ω
)
•
5 Flashes: Port overload fault
•
9 Flashes: Power management allocation
exceeded
HEAT
Displays the heating
status of low
temperature Off Device is not in heating status
Blinking (Blue) Device is heating
ETH Network Link Status
Off No uplink on the Ethernet port
On (Yellow) 10/100 Mbps Ethernet link negotiated
On (Green) 1000 Mbps Ethernet link negotiated
Blinking Traffic on Ethernet link
R0 Radio 0 Status
Off
Radio 0 is not providing either access
(SSID) or backhaul (mesh) service
On (Blue)
Radio 0 is providing access (SSID) service
or backhaul (mesh) service
R1 Radio 1 Status Off
Radio 1 is not providing either access
(SSID) or backhaul (mesh) service