Aruba LS-BT1-MNT-50
| Installation Guide
3
Installing the Device using Screws
This mounting option allows mounting the device on a flat surface using screws.
Required Tools and Equipment
The following tools and equipment are required for installing the device:
One mounting bracket
Two M3 flat head screws (not included in the package)
Suitable screwdriver (not included in the package)
Installation Steps
To install the device using screws:
1. Choose a flat surface for the mounting bracket.
2. Secure the mounting bracket in the upright position on the surface using two M3 flat head screws,
as shown in
Figure 5
Securing the Mounting Bracket on a Flat Surface
3. Align the keyhole slots on the device with the projections on the mounting bracket, as shown in
Figure 6
Aligning the Device with the Mounting Bracket
4. Slide the device down until the clip of the mounting bracket snaps onto the top of the device, as
shown in
Ensure that the device is activated before attaching it on the mounting bracket.
