Aruba LS-BT1-MNT-50
Installation Guide
0511745-01
|
December 2014
1
This document provides installation instructions for mounting the LS-BT1 location beacon in an
indoor environment using the LS-BT1-MNT-50 accessory kit.
The LS-BT1 location beacon is referred to as
device
in rest of the document.
Package Contents
50 sets of mounting bracket and adhesive pad (one set per device)
Installation guide (this document, printed)
Installing the Device using the Adhesive Pad
This mounting option allow mounting the device on a flat surface using an adhesive pad.
Required Tools and Equipment
The following tools and equipment are required for installing the device:
An adhesive pad (included in the package)
Prerequisites
Before installing the device, ensure that the following surfaces are clean and dust-free.
the mounting surface
the grooves for adhesive pads on the bottom of the device
It is recommended to clean these surfaces using a solvent with 50/50 isopropyl alcohol/ water
mixture.
Installation Steps
To install the device using an adhesive pad:
1. Attach the adhesive pad on the grooved area on the back of the mounting bracket, as shown in
Figure 1
Attaching the Adhesive Pad to the Mounting Bracket
.
