Aruba AT-8400 SERIES, User Manual

Page: 30 / 303

Chapter 3: Basic Switch Commands
28
❑
SET SYSTEM on page 48
❑
SET SYSTEM TEMPTHRESHOLD on page 49
❑
SHOW ASYN on page 50
❑
SHOW CONFIG on page 51
❑
SHOW DHCPBOOTP on page 52
❑
SHOW IP on page 53
❑
SHOW IP ROUTE on page 54
❑
SHOW SWITCH on page 55
❑
SHOW SWITCH LINECARD on page 56
❑
SHOW SYSTEM on page 57
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S60 Management Software User’s Guide for
background information on basic switch parameters.