AT-S60 Command Line User’s Guide
135
The METHOD parameter states the type of upload. There are two
possible types of uploads. A TFTP upload uses the TFTP client software
on the switch to upload a file from the switch to a TFTP server on your
network. You can perform this type of upload from either a local or
Telnet management session.
The XMODEM download method uses the XMODEM utility to upload a
file from the switch to a terminal or computer with a terminal emulator
program connected to the RS-232 Terminal Port on the AT-8401
management card. This type of upload must be performed from a local
management session.
The DESTFILE parameter specifies the name that the file is to be store as
on the switch. This parameter is only used with a TFTP upload.
The SERVER parameter specifies the IP address of the network node
containing the TFTP server software. The uploaded file will be stored on
this node. This parameter is only required for a TFTP upload.
The FILE parameter specifies the name of the file that you want to
upload from the switch. To view the files stored in the file system of a
switch, see
Before uploading a file, note the following:
❑
When naming an uploaded file, you should give it the three-letter
extension that corresponds to its file type. The extensions are
listed in Table 2.
❑
To upload the AT-S60 management image, specify “ATS60.IMG”
as the value for the FILE parameter. (The AT-S60 management
image is not listed in a switch’s file system.)
Table 2
File Name Extensions
Extension
File Type
.img
AT-S60 management software
image
.cfg
AT-S60 configuration file
.cer
Public key certificate
.csr
Public key certificate enrollment
request
.key
Encryption key file
