14
AP-270 Series Outdoor Access Point
| Installation Guide
5. On the AP-274, install the external antennas according to the manufacturer’s instructions, and connect
the antennas to the antenna interfaces on the AP.
Mounting the AP to a Vertical Pole
The mounting bracket provides different slots for pole mounting according to the diameter and shape of the
pole as shown in
Figure 18
or
Figure 19
.
1. Begin by attaching the mounting bracket to the vertical pole as shown in
Figure 18
or
Figure 19
.
a. Pass a hose clamp through the two slots on the mounting bracket, attach the mounting bracket to the
pole and tighten the clamp by using a screw driver to twist its screw head. Two hose clamps are
included in the mount kit.
b. Use another hose clamp at the other two slots on the mounting bracket.
Figure 18
Attaching the Mounting Bracket (AP-270-MNT-V1) to a Vertical Pole
Figure 19
Attaching the Mounting Bracket (AP-270-MNT-V2) to a Vertical Pole
2. Slide the holder of the AP into the opening of the bracket and use the two screws to fix the holder as
shown in
Figure 20
or
Figure 21
.
