Aruba 203R Series Wireless Access Points
| Installation Guide
3
Network Status (E1)
The Network Status (E1) LED indicates activity transmitted to/from the wired E1 port. See
Table 3
.
Table 3
Network Status LED
4 Flickering: the LED’s on/off cycle is active for irregular intervals.
Network/PSE Status (E2)
The Network/PSE Status (E2) LED indicates activity transmitted to/from the wired E2 port.
For Aruba 203RP access points, this LED also indicates when the access point is providing Power over Ethernet
(PoE) to an external device that is physically linked to the E2 port. See
Table 4
.
Table 4
Network/PSE Status LED
LED Display Settings
The LEDs have three operating modes that can be selected in the system
management software:
Default mode: Refer to
Table 1
-4
Off mode: LEDs are off
Blink mode: LEDs blink green
Color/State
Meaning
Off
Meets one of the following conditions:
device is powered off
port is disabled
no link established
Green/solid
Link established
Green/flicker
4
Activity detected across link
Color/State
Meaning
Off
Meets one of the following conditions:
device is powered off
port is disabled
no link established
Green/solid
Link established
Green/flickering
Activity detected across link
Blue/solid
Link established; supplying PoE-out (Aruba 203RP only)
Blue/flickering
Activity detected across link; supplying PoE-out (Aruba 203RP only)
