Aruba Networks S2500 Series, Installation Manual, Page: 31 / 40

Aruba S2500 Series Mobility Access Switch | Installation Guide Installation | 31
Installing an SFP
To install an SFP module into the S2500:
1. Slide the SFP module, top side facing upward, into a 1000Base-X port until a connection is made and an
audible click is heard. See Figure 16 for more information.
Figure 16 Installing an SFP
Removing an SFP
To remove an SFP module:
1. Open and release the latch on the SFP module.
2. Pull and remove the module from the port.
Connecting an LC Fiber Optic Cable
To connect an LC fiber optic cable into an SFP-SX or SFP-LX module:
1. Clean the fiber optic cable connector before inserting it into the SFP+.
2. Insert the fiber optic cable into the SFP module. Ensure that the latch on the cable faces the top of the
SFP module.
3. Slide the cable into place until a connection is made and an audible click is heard.
To disconnect an LC fiber optic cable from an SFP-SX or SFP-LX module:
Use standard ESD precautions when installing or removing an SFP.
POWER
MENU
ENTER
STATUS
STACK