17
1
1
EN
LED - COLORED LIGHTING
OPERATING UNIT DESCRIPTION OF FUNCTIONS
1. LED colored lighting:
LED colored lighting
-
ON
– one short press. The automatic color
cycle begins.
Select color –
press again once. The color cycle is stopped, the
color displayed remains on.
Further colors
– By pressing again various other colors can be
selected.
LED colored lighting
-
OFF
– press for approx. 2 seconds.
Do not look directly into the ray of light from the operational LED
colored lighting lamp from the front. This may cause damage to
your eyes.
DIN EN 62471, 2008
when within 40 cm
LED- risk, category 1
TROUBLESHOOTING
Air system doesn't work
LED blinks only every 8 seconds: water level in the tub is
too low (at least 2cm). LED doesn't blink at all: Check the
main switch, the fuse and the power connection.
Air system turns itself off
The cycle time of 20 minutes is over or the water level
in the tub is too low (at least 2cm).
Colored lighting does not work
Check the main switch, the fuse and the power connection.
Jet blow out does not work
The automatic jet blow dry only starts 20 minutes after
the end of the shower or when the tub is completely
empty after a bath.
