Arturia Wurlitzer-V, User Manual, Page: 43 / 57

right, it results in a very thin audio signal close to a ringing sound.
The Dry/Wet potentiometer sets the ratio between the input signal and the treated signal.
The main interface of the Vocal filter, located on the central TV style screen, shows a series of five
vowels (A,E,I,O and U).
The Vocal filter frequency can be set in real time:
•
Manually by moving the red ball cursor between five vowels or moving the vowel letters by
dragging them on the screen surface of the Vocal filter.
•
An LFO is also available to modulate the cursor movements.
•
You can set the radius amplitude of the LFO by clicking on the red ball cursor and moving it
out of its initial central place. This action will set width of the circular ball movements.
•
It´s also possible to re-arrange the order of the five vowels on the screen space. To do this,
simply click on one of the 5 letters and drag it to the place you wish on the screen. Those
changes will introduce some interesting variations when you modulate your five filters
manually or with the LFO.
4.5.9 Pitch Shift Chorus
Delay Sets a trade-off between latency and low frequency response.
Mix Sets the ratio between the input signal gain and treated signal gain.
Detune Sets Detune amount in cents.
Level Sets the trim level.
The pitch shift chorus is a pitch shifter that allows you to create nice thick unison detune sounds. It
is a different sound than you get from a standard chorus. You can set the detune amount (left
channel is lowered in pitch, right channel is raised) setting the
Detune knob. The Delay knob sets
the delay time of the input signal, to offset the latency and low frequency response.
The Mix potentiometer sets the ratio between the input signal and the treated signal, and the
Level
knob sets the trim level of the mixed signal.
ARTURIA WURLITZER V User's Manual -43- 4 USER INTERFACE