Arturia Wurlitzer-V, User Manual

Page: 31 / 57

•
Remove assignment: assignments can be removed by clicking the UNASSIGN button. The
message “UNASSIGNED” will then be displayed.
All these operations deal with a single plug-in parameter. In order to setup a complete
configuration, a set of parameters should be configured.
To close the learn mode, just click the MIDI button again.
Manage configurations
You have the possibility to maintain multiple configurations.
•
Default configuration: by default, Wurlitzer V loads a configuration for the Arturia Analog
Experience Keyboards.
•
Select one configuration: a configuration is loaded by clicking the entry in the MIDI drop-
down menu.
•
Create a new configuration: a new configuration can be created by clicking the Create a
new config
entry on the
MIDI
drop-down menu. You also can create a new configuration
including your own assignment operations described in the previous section. This
configuration has to then be saved by clicking on the
MIDI drop-down menu, Save current
config as
entry. In both cases, a popup opens:
enter the name of your config
. A new entry
for your configuration now exists in the list of available configurations.
•
Remove a configuration: it is possible to remove a configuration by loading it and then
clicking on
Delete current config , on the MID I drop-down menu.
Minimum and maximum bounds
For each assignment, a minimum range value (MIN) and a maximum range value (MAX) can be
set:
•
The assigned parameter will have the configured minimum value when the controller will be
at its lowest position.
•
The assigned parameter will have the configured maximum value when the controller will
be at its highest position.
•
You can invert (Negative Slope) Min and Max so that parameter will have minimum value
when control has the highest value, and parameter will have maximum value when control
has the lowest value.
ARTURIA WURLITZER V User's Manual -31- 4 USER INTERFACE