ARTURIA – Modular V – USER MANUAL
68
To restore their independence, just click on the “Link” button.
It is possible to add as many amplifiers as necessary. In this case it is still the
output of the first amplifier, which will have the signal corresponding to the sum
of all of the amplifiers of the group, the others retaining their independence.
Thanks to this method, with 16 amplifiers to begin with, it is possible to create a
large range of mixing while keeping a few amplifiers available for modulation.
We can, for example, form a group of the first six amplifiers to mix the first six
oscillators, then a group with the next 3 to mix the 3 last oscillators, and finally
a group with the next 2 to mix the outputs of 2 filters which will respectively treat
the output of the first amplifier and the output of the seventh. There are 5
remaining amplifiers for modulation or other mixes.
Each amplifier possesses a current limiting function allowing a soft clipping. This
function is activated with the “clip” button. The “inv” button lets you invert the
signal, as input to the corresponding amplifier..
The four right VCA are modulated with a linear function, on the contrary, the
other are modulated with a exponential function.
4.1.8
Trigger delay
Trigger delay
Time 1: Sets the time for the first delay
Trigg 1 Input: Choice of trigger input for the first delay
Mode: Choice of mode (independent, parallel, series)
Time 2: Sets the time for the second delay
Trigg 2 Input: Choice of trigger input for the second delay
Time1
Time2
Mode
Trigg 1 Input
Trigg2 Input
