9.10.3. Roller/Looper settings
9.10.3.1. Roller/Looper Mode
When the DrumBrute Impact is playing (and not recording) the Touch strip can have two
different (but exclusive) behaviors: Roller or Looper. This option allows you to change this
behavior. See the
for more details.
9.10.3.2. Roller/Looper MIDI
When activated, the Touch strip will send a MIDI CC (Control Change) value each time you
touch it, except when setting a Step Repeat value. The Touch strip also will be activated each
time a matching MIDI CC message is received by the DrumBrute Impact.
You can change the MIDI CC number of the Touch strip (see the
section). But the MIDI CC
values sent and recognized by the Touch strip are fixed:
Touch strip region
CC value sent
CC value to activate
OFF
0
0-24
1/4
25
25-49
1/8
50
50-74
1/16
75
75-99
1/32
100
100-127
For example, if the DrumBrute Impact receives MIDI CC values between 25 and 49, this will
activate the 1/4 setting on the Touch strip. Touching the strip on 1/4 will send only a value of
25.
The Looper/Roller sends and receives on the Global MIDI Channel, which can be changed
using the
tab.
97
Arturia - User Manual DrumBrute Impact - MIDI Control Center
Summary of Contents for DRUMBRUTE IMPACT
Page 1: ...USER MANUAL...
