ARTURIA – ANALOG FACTORY S.E. - MANUAL
22
To take a Snapshot:
Simply
Shift+Click
on one of the buttons in order to save the preset currently
being used.
Then, later, to recall the preset along with any modifications that may have been
made to it, click on the same button.
If the same
Shift+Click
operation is done on the same button, then the current
Snapshot will be replaced without prompting the user.
3.4.9
MIDI control
Most of the knobs, sliders, and switches on the Analog Factory S.E. can be
manipulated with external MIDI controllers, and this is ideally the way they should be
controlled, in order to get a high level of usability. Before anything else, the user
should make sure that the MIDI device being used is correctly connected to the
computer, and that the sequencer or the Analog Factory S.E. application is correctly
configured to receive MIDI events coming from the device.
Every instance of the Analog Factory S.E. receives MIDI events transmitted on a given
channel. This reception channel is defined in a global manner for the synthesizer,
either in the sequencer, or in the standalone Analog Factory S.E. application. On the
reception channel, the Analog Factory S.E. can receive different MIDI controls.
It is possible to choose a reception control for each knob, which means assigning an
external controller to a given parameter. For this, one should
click on the knob
being used while holding down the Control key
. A configuration window appears
and offers the choice of a MIDI control number. The user can also click on the
«Learn» button and move one of the physical MIDI controllers. In this case, the
control number will be detected and configured automatically. To deactivate the MIDI
control of a knob, simply uncheck the «Active» option in the MIDI control window.
