3
SMART STREAM
7. DOWNLOADING THE 4STREAM APP
8. INSTALLATION
Download the 4 Stream-app from the App Store for iOS-devices or Google Play Store for Android-devices. The
app is explained in different languages, including English, French, German, Italian, Spanish and Portuguese.
8.1 FIRST USE VIA WIRELESS SETUP
1. Hold the RESET-button and then connect the power cable.
2. The LED will start flashing rapidly, release the button and wait until the light flashes slowly.
3. Make sure that your mobile phone is connected to your home network via Wi-Fi (2.4GHz) and that your GPS
and Bluetooth are on.
4. Open the 4Stream app. On the Android-devices, the system will ask permission for GPS & Storage, click
“Accept” to continue. The GPS-permission is required only during installation, you can switch it off again later
on. Permission for storage of files serves to allow 4Stream access to the local music files on your device.
5. The 4Stream app will show a list of all devices available for installation, select the one you wish to install.
6. The 4Stream app will ask you which network you wish to connect to.
7. Now enter the password for your network.
8. As soon as the connection is completed, there will be a check on new software updates for the Smart Stream.
9. Then you can change the name of the device. You can choose a pre-selected name or enter your own name.
10. After setting the name of the device, this will appear in the list of devices in the 4Stream app and you can
start streaming music.
There is another way of installing via Wi-Fi, should the method explained above not work:
1. Hold the RESET-button and connect the power cable.
2. The LED will start flashing rapidly, release the button and wait until the light flashes slowly.
3. Go to your mobile Wi-Fi-setting and search for SmartStream_xxxx Wifi and connect.
4. Open the 4Stream app and you should be able to see the SmartStream_xxxx in the list of devices.
*Your device may ask your whether you wish to keep using this Wi-Fi connection, click Yes.
5. 6) Click the “+” icon in the top right corner to add the device. The app will ask you to select your wireless
network. If necessary, enter the password and click on Connect.
6. Once connected, you can change the name of the Smart Stream. You can choose a pre-selected name or
enter your own name. This is mainly convenient in case multiple Smart-devices are being used.
7. After setting the name of the Smart Stream, this will appear in the list of devices in the 4Stream app.
8.2 CONNECTION VIA LAN
Connect the network cable to the RJ45 Ethernet port indicating LAN. The Smart Stream will appear in the app
after about 10 seconds.
(Remark: The mobile phone and the device must be situated in the same network)
8.3 CONNECTION VIA BLUETOOTH
Switch to the Bluetooth mode by pressing Bluetooth in the app. Now look for the device SmartStream_XXXX in
the Bluetooth settings and make the connection.
