MIC-216
3
Warning.
When Installing the Unit.
• Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
• Use the unit only with the voltage specified on
the unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the power
cord in close proximity to heaters, and never place
heavy objects -- including the unit itself -- on the
power cord, as doing so may result in fire or electric
shock.
• Be sure to replace the unit’s terminal cover after
connection completion. Because high voltage is applied
to the speaker terminals, never touch these terminals
to avoid electric shock.
• Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a gas
pipe as a catastrophic disaster may result.
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling down,
causing personal injury and/or property damage.
When the Unit is in Use.
• Should the following irregularity be found during use,
immediately switch off the power, disconnect the
power supply plug from the AC outlet and contact your
nearest ArtSound dealer. Make no further attempt to
operate the unit in this condition as this may cause fire
or electric shock.
• If you detect smoke or a strange smell coming from
the unit.
• If water or any metallic object gets int o the unit
• If the unit falls, or the unit case breaks
• If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
• If it is malfunctioning (no tone sounds.)
• To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage compo-
nents inside the unit. Refer all servicing to your near-
est ArtSound dealer.
• Do not place cups, bowls, or other containers of liquid
or metallic objects on top of the unit. If they acciden-
tally spill into the unit, this may cause a fire or electric
shock.
• Do not insert nor drop metallic objects or flammable
materials in the ventilation slots of the unit’s cover, as
this may result in fire or electric shock.
Caution.
When Installing the Unit.
Due to product upgrades, while some of the features and specification in the user manual does not
match the actual functions, sorry for any inconvenience and thanks for your kind understanding!
• Never plug in nor remove the power supply plug with
wet hands, as doing so may cause electric shock.
• When unplugging the power supply cord, be sure to
grasp the power supply plug; never pull on the cord
itself. Operating the unit with a damaged power supply
cord may cause a fire or electric shock.
• When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit with
the power cord connected to the outlet may cause
damage to the power cord, resulting in fire or electric
shock. When removing the power cord, be sure to hold
its plug to pull.
• Do not block the ventilation slots in the unit’s cover.
Doing so may cause heat to build up inside the unit
and result in fire.
• Avoid installing the unit in humid or dusty locations, in
locations exposed to the direct sunlight, near the heat-
ers, or in locations generating sooty smoke or steam
as doing otherwise may result in fire or electric shock.
