![Art's-Way Manufacturing 166 Operator'S Manual Download Page 48](http://html.mh-extra.com/html/arts-way-manufacturing/166/166_operators-manual_2977168048.webp)
12 - SET-UP INSTRUCTIONS
46
Alt= to hide template information
Alt+ to display template information
Template Name: OML_1_col
Rac 0-00000
Template Date: 1997_02_12
REQUIRED BUILDING AND EQUIPMENT
WARNING:
Hydraulic oil or diesel fuel leaking under pressure can
penetrate the skin and cause infection or other injury.
To Prevent Personal Injury:
Relieve all pressure, before disconnecting fluid lines or working in the
hydraulic system.
Before applying pressure, make sure all connections are tight and
components are in good condition.
Never use your hand to check for suspected leaks under pressure. Use a
piece of cardboard or wood for this purpose.
If injured by leaking fluid, see your doctor immediately.
M149B
WARNING:
Wear safety glasses and be careful when cutting wires and
steel bands as they are under tension and will spring back when cut.
M201A
The 166 Plow is available in widths from 7.7 to 12
feet. Ten feet of space is required on each side of the
machine during set up procedures.
The door of the building in which the plow is set up
must be of a width which will let the plow pass
through when in the transport position.
The door height must be at least 12 feet.
The building ceiling height must be at least 20 feet.
The building floor must be level and hard.
The instructions in this manual show the assembly of
the machine inside a building. The methods and
equipment that are shown permit you to unload the
truck and assemble the machine using standard
shop procedures. If you use other equipment than
what is shown, make sure that your equipment has
the capacity to do the job safely.
Put the packages in a clean work area. Check all
equipment carefully for damage.
The photos in this manual show the use of lifting
equipment and jack stands. The following is a list of
the equipment and capacity ratings.
• Forklift ................................................ 6,000 pound
• Lifting Chain ..................................... 10,000 pound
• Jack Stands ...................................... 10,000 pound
• Chain Hoist ........................................ 8,000 pound
• Lifting Strap ........................................ 8,000 pound
• Hand Tools
• Lb Ft Torque Wrench
NOTE:
The contents of the specific packages will
vary depending on the type and size of the plow.
!
!