manualshive.com logo in svg

Art's-Way Manufacturing 166, Operator'S Manual

Share
Download
Art's-Way Manufacturing 166 Operator'S Manual Download Page 37

35

Alt= to hide template information

Alt+ to display template information

Template Name: OML_1_col

Rac 0-00000

Template Date: 1997_02_12

9 - MAINTENANCE

GENERAL PREVENTIVE MAINTENANCE

RD99N035

Make sure your 166 Plow is ready to go to the field
when you are. Perform service and maintenance
procedures recommended in this section to prepare
your plow for the field.

NOTE:

Procedures for plow adjustments are

included in the Operating and Field Operations
section of this manual.

1. Carefully clean the plow completely.

2. Replace any worn, missing or broken parts.

3. Check all nuts and bolts. Refer to the Torque

Data charts in this section and torque all nuts and
bolts to specified torque values.

4. Refer to Lubrication section in this manual and

lubricate the plow as indicated.

5. Check air pressure in all tires. Refer to

Specifications section in this manual and inflate
tires to correct tire pressure as indicated.

6. Check all wheel bolt lugs. Refer to Specification

section in this manual and torque as indicated.

7. Check all hydraulic connections and fittings.

Refer to Standard Torque Data for Hydraulic
Tube and Fittings table in this manual and torque
connections as indicated.

8. Make sure all cylinder rods are clean before

operating plow.

9. Connect Plow to tractor and check operation of

hydraulic lift system.

NOTE:

Make sure the area around the plow is clear

of people and obstructions before operating the
hydraulic system.

Refer to Operation Instructions and Field Operations
sections in this manual and make adjustments to
plow as necessary.

Summary of Contents for 166

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands