50
3D FUNCTION
y
You may see left and right images
overlapped during projector
initialization after it is powered on. It
may take some time for optimization.
y
It may take some time for the 3D
image to look normal after you turn
your eyes away from the screen and
look back at the 3D image.
y
It may flicker slightly while watching
3D images under a 3 wavelength
lamp fluorescent light (50 Hz to
60 Hz) or near windows. If so, it is
recommended to block the sun light
with a curtain and to dim the lights.
y
The 3D glasses must be DLP-LINK
(DLP Ready) type.
y
You may not be able to watch 3D
properly if there is an obstacle
between the projector and 3D
glasses.
y
Install the 3D projector as far as
possible from other devices.
y
If a future 3D broadcasting format
that is not supported by this projector
becomes the standard, an additional
device such as a set-top box may be
required.
Please check the following when
using 3D glasses.
y
Do not use 3D glasses as ordinary
glasses, sunglasses or protective
goggles.
- If you do so, this may cause injury.
y
Do not store 3D glasses in very hot
or very cold conditions. If you do, this
may cause them to become distorted.
Do not use distorted glasses.
y
Do not drop 3D glasses or allow
them to come into contact with other
objects.
- This may cause product malfunction.
y
The lenses of 3D glasses are easily
scratched. Use a soft clean cloth
when cleaning them.
y
Foreign particles on the cloth may
cause scratches.
y
Do not scratch the surface of the 3D
glasses' lenses with sharp objects
or wipe them with chemicals. If the
lenses get scratched, images may not
look normal when viewing 3D.
