Artistic License micro-scope 3a, User Manual, Page: 26 / 73

Artistic Licence Engineering Ltd. Micro-Scope 3a user guide
26 / 73
SELECT DMX
START CODE
The START CODE menu is used to select non-zero DMX512 start
codes. The Start Code was
not widely used in DMX512.
However, DMX512-A makes
significant use of this
feature.
The Start Code value is reset to zero when Micro-Scope is
switched on.
The Display Received Start Codes menu provides an alternative
method of editing the start code. The Start Code affects both
receive and transmit DMX512.
The UP and DOWN keys are used to select any one of the 256
possible values. The same value is used for both receive and
transmit DMX512.
The Toggle key selects “Don’t Care” mode that is displayed as
“xxx”. In this mode a value of zero is used for the transmit start
code. However, received DMX512 will be displayed as good data
whatever the start code.
The bottom line of the display shows registered start code owners.