Artistic License Dali-Scope User Manual Download Page 8

Warranty

All products are covered from date of purchase 

by a two-year return to base warranty. 
By return to base, we mean that the customer 

is responsible for all costs of transport to and 

from Artistic Licence.
Returns will not be accepted without prior 

authorisation. In order to discuss a request to 

return goods, please email: 
 [email protected]
  

Compliance

All Products manufactured or sold by Artistic 

Licence Engineering Ltd are fully compliant 

with the appropriate CE, FCC, and RoHS 

regulations.  Product  specific  information  is 

available on request.
 

Waste Electrical & Electronic Equipment  

(WEEE)

Artistic  Licence  is  a  member  of  a  WEEE 

compliance scheme and will happily recycle 

any of our products that you, at your expense, 

return to us. 

User Interface / Indication

Connections:
-

 

RCA Jack (phono) DALI connection (1 no.)

- AA Battery compartment (1 no.)

Configuration: Set-up menu option

User Interface: 9-button control panel
Indication: Dot Matrix display

Control

Control over 1 DALI circuit
Output Protocols: DALI

Isolation / Protection

Isolation: Opto-Isolation on all DALI lines

Package Contents

Dali-Scope
User Guide
Phono to Clip Lead
2x AA Batteries

Ordering Info

Product Code: Dali-Scope

Accessories (not included)

- Replacement Dali-Scope Lead

WARNING: Please ensure batteries are 

inserted with correct polarity - failure 

to do so can result in product damage 

Due to our policy of continuing product improvement 

specifications are subject to change without notice

Artistic Licence

 

The Mould Making Workshop

Soby Mews

Bovey Tracey

TQ13 9JG

United Kingdom

Telephone    +44 (0) 20 8863 4515

Email:             [email protected]

Web:    

www.ArtisticLicence.com

[email protected]

Summary of Contents for Dali-Scope









Reviews: