11
DALI - LEVEL - RANGE Menu
This menu allows transmission of the DALI ARC command which is used to set the device’s intensity
level. Transmission can be directed to a range of channel or group addresses. Use the LEFT and
RIGHT keys to navigate through the option fields. Use the UP and DOWN or FUNCT keys to select the
required option within an option field.
The operating functions are:
•
MAN
–
DALI transmitted when user varies the level or presses ENTER.
•
SNAP
–
snaps between on and off every second.
•
FADE
–
slowly fades to full and rolls over to zero.
•
RAMP
–
slowly fades to full then back to zero.
•
ALT
–
Odd channels fade up while even channels fade down.
•
WALK
–
Odd channels fade up while even channels fade down.
To change the operating function either press the FUNCT key or select the Func field and use the UP
and DOWN keys.
In manual mode, a new ARC value is sent
when ENTER is pressed or when the ‘at’ field is edited.
The SNAP & WALK modes send an ARC every 1.5s. The other modes send an ARC value every 39mS.
This achieves a fade time of approximately 10s. However, in order to conserve bandwidth, as the
range of channels or groups is increased, the resolution is lowered.
DALI - LEVEL
–
TYPE 8 Menu
This menu allows control of Device Type 8 colour parameters. Commands can be directed to
broadcast, channel or group address. Use the LEFT and RIGHT keys to navigate through the option
fields. Use the UP and DOWN keys to select the required option within an option field.
Device Type 8 allows control of colour using up to four colour types, numbered 0 to 3. Not all devices
will support all of the colour types.
The first option field is used to select the colour type parameter from the following list. The number
represents the colour type:
•
0 CIE-X
•
0 CIE-Y
o
Colour Type 0. XY coordinate. Defines the 16-bit XY coordinates in CIE chromaticity
colour space.
•
1 TEMPc
Tx
CHANNEL
to
00 - 03
at
254
/254
Func:
WALK
Send DT8
1 TEMPc
to
CHANNEL 04
at
65534