Artistic Licence matisse Light-Switch II, User Manual

Page: 32 / 44

Artistic Licence Engineering Ltd. matisse Light-Switch II & Switch-Edit user guide. 32/44
USING
PALETTES
To display the palette, click on the Palette
button at the top of the screen. The Palette
contains 50 entries that contain settings for
every attribute of every fixture.
These values are defined in the Fixture
Editor.
For ease of use, the palette entries are
coded by colour, but they are equally valid
for use with position and beam attributes.
The palette can be used in both
spreadsheet and fader view of a memory.
Simply drag the required palette entry and
drop it on the required fixture. The cursor
changes to a hand icon with a small moving
lamp icon.
The entire fixture changes to represent
the levels contained in the palette. This drag and drop function can be
further modified by combination of the Shift, Ctrl and Alt keys as detailed
in the table below.
Hold
Key Cursor Dropping on
Channel Type Result
None Moving
Lamp Icon All Entire fixture is set to the level
contained in the palette.
Shift Fader Icon All Only the channel that is
dropped upon will change to
the palette value.
Ctrl Light Bulb Intensity All intensity channels within the
fixture change to the levels
contained within the palette.
Arrows Position All intensity channels within the
fixture change to the levels
contained within the palette.
Colour
Wheel Colour All intensity channels within the
fixture change to the levels
contained within the palette.
Hold
Key Cursor Dropping on
Channel Type Result
Ctrl
cont Diamond
Gobo Beam All intensity channels within the
fixture change to the levels
contained within the palette.
Hammer Control All intensity channels within the
fixture change to the levels
contained within the palette.
Alt Multiple
Lamps All Sets all patched fixtures to the
levels contained in the palette.