Artistic Licence matisse Light-Switch II, User Manual

Page: 13 / 44

Artistic Licence Engineering Ltd. matisse Light-Switch II & Switch-Edit user guide. 13/44
SETTING THE
ZONE
Light-Switch has the capability of controlling 15 individual zones utilising
Slave panels to control the different zones. Switch-Edit is used to
program zone information. Before programming it is recommended to
plan what zones are required and list the DMX channels assigned to
each zone.
PROGRAMMING
Each panel (Master or Slave) must be assigned a zone. By default, they
are set to zone 1. To assign the panel to a different zone follow the
procedure below:

Set Dip-Switch 5 to ON

Power on Light-Switch

Press the G-M Down Arrow

Select either page A or B

Press the relevant number

Set Dip-Switch 5 to OFF
Note: When a slave panel has changed zones the Master panel must be re-booted
SNAP-SHOT
Memories: To program a memory follow the procedure below:

Connect the Master Light-Switch to a DMX source

Set Dip-Switch 5 to ON position

Power on the Light-Switch (both arrow keys will flash)

Press the ‘Up Arrow’ button

Press a Memory Page (A to D*)

Press a Memory Number (1 to 8)
o
DMX record occurs when a number button is pressed
o
When a memory is recorded the corresponding LED will
remain lit

Once finished turn the unit off and remove the DMX source

Set Dip-Switch 5 to OFF and reconnect to the DMX fixtures

Power the unit on
* Sequences: In Snap-Shot mode a sequence is considered the same
as a memory, i.e. it will playback the single snapshot when selected.
There are six sequences that can be programmed.
To program sequences using multiple memories Switch-Edit is used to
define the sequence structure.
Note: The slave Light-Switches do not need to be programmed with
memories or sequences.
Page A1 to 8 Zone 1 to 8
Page B1 to 7 Zone 9 to 15