Artist Guitars LP DIY KIT, Manual

Page: 6 / 16

ASSEMBLING OF TUNERS
Before attaching the neck to the body, fit the tuning machine-heads to the
headstock by inserting the thread through the pre-drilled holes and setting a
washer and bush over it. Screw down the bush onto the thread until it fits
tightly to the touch and then adjust the rear of the machine-head so that the
tuning button sits vertically above the top edge of the headstock.
Tighten the nut on the front face of the tuner until it is firm by using a spanner
of the correct size. Repeat this for the remaining five tuners.
6
LP DIY KIT MANUAL