2
ASSEMBLY PROCEDURE:
STEP 1:
To begin installing the Side
Burner Mounting Shelf in
your
Artisan
cart, you must
first remove the appropriate
existing shelf unit out of it.
This is accomplished by re-
moving the 4 screws and
lock washers located on the
under the shelf and on the
sides.
Save this screws
and washers for later use.
(See Figure # 1)
Note: ARTC-32 shown in
this drawing is for illustra-
tive purposes only. These
same instructions apply to
all
Artisan
cart models.
COMPONENTS INCLUDED IN THIS KIT:
ITEM DESCRIPTION:
QTY:
A
GROMMET
1
B
1/4” LOCK WASHER
5
C
1/4-20 x 1/2” SCREW
5
D
SHELF (AS SHOWN BELOW)
1
ITEM NOT INCLUDED AND REQUIRED
FOR ASSEMBLY OF THIS UNIT:
STANDARD #2 PHILIPS SCREWDRIVER
B
A
C
D
Figure # 1
EXISTING
SHELF
SCREWS
AND
WASHERS
