Quick Start Guide
• 7
Step 4
In the Certified Wireless USB management application on the PC, indicate that you want to
add a new device. When prompted, ensure that the ‘cable association’ method of connecting
is selected.
Step 5
Any further options provided in the wireless management application can be set as you wish.
Step 6
Once association is complete (should take no more than 5-10 seconds), disconnect the USB
cable between the PC and the device side wireless adaptor.
Step 7
Reconnect the USB mass storage device to the device side wireless adaptor.
You have now added a new host association!
To switch between the ‘pre-associated’ host side
wireless adaptor and the wireless PC just associated, press and release the button on the top
of the device side wireless adaptor. An LED on the side of the device adaptor should change
to indicate which available host is now selected for use. The status of the connection to a host
is indicated as follows:
Host selected and connected
Host select but not connected
Host not selected
The ADP-RDK can store up to three associated hosts. When a fourth one is added, the
first one associated is overwritten (the association of the two adaptors in the sample kit is
permanent and cannot be overwritten).