Matrix-710 Hardware Guide
ARTILA
16
3.6 Console Port
There are two serial console ports for use:
•
Micro-USB connector which is USB client acts as serial console port.
•
Debug Console: There is a 4-pin wafer box header (JP3) inside the box.
Pin assignment is: RX, TX, +3.3V, GND.
Therefore, you need to open the upper metal case and prepare or purchase a
serial console cable to use the serial console port.
Or, it can be purchased “Console Cable” from Artila, P/N is CB-PHDF9-050.
3.7 USB Port
Four type-A USB 2.0 ports are built for operation.
1
2
3
4
RX
TX
+3.3V
GND
