Artifex LDD100-F Series Original Operating Instructions Download Page 10 | Manualshive

Page: 10 / 72

Artifex LDD100-F Series Original Operating Instructions Download Page 10

LDD100

Operating Instructions

10 / 72

CAUTION!

This combination of symbol and signal word indicates a possibly-
dangerous situation which could cause slight injuries if it is not avoided.

NOTICE!

This combination of symbol and signal word indicates a possibly-dangerous
situation which could cause property and environmental damage if it is not
avoided.

Tips and recommendations

This symbol highlights useful tips and recommendations as well as
information designed to ensure efficient and smooth operation.

Special safety instructions

The following symbols are used in the safety instructions to draw attention to specific
dangers:

DANGER!

This combination of symbol and signal word indicates an immediately-
dangerous situation due to electric shock. If an instruction so marked is not
heeded, severe or even fatal injuries can be the consequence.

DANGER!

This combination of symbol and signal word indicates an immediately-
dangerous situation due to laser emission. If an instruction so marked is not
heeded, severe or even fatal injuries can be the consequence.

«
...
8
9
10
11
12
...
»

Summary of Contents for LDD100-F Series









































































Reviews:

No comments