12
6.
Rotate the base cover clockwise from
OPEN
position to
LOCK
position,
until you hear a "click" sound. Now
the base cover is blocked. (f)
(f)
7.
Connect the plug into the wall socket and switch on the
appliance again. (g)
(g)
8.
Reset Filter's lifetime.
If after replacing the new filter, the indicator lights up,
you should reset the filter life.
(h)
1. Plug in the air purifier and turn it on.
2. Press and hold for 3 seconds. (h)
3. Release the button after 3 seconds and the light will turn off.
4. The reset is now complete.
5.2
Filter replacement force mode
When using the air purifier in an environment of heavy pollution, the lifespan of
the air filter may significantly reduce. You can change the filters even if does
not light up. Follow the steps below to perform a hard reset.
1. Replace the air filters as mentioned in the Filter Replacement section (5).
2. Plug in the air purifier and let it be in standby mode.
3. Press and hold the button for 3 seconds. The indicator will light up.
4. Press and hold the button for 3 seconds again and the indicator will turn off.
The reset is now complete.
Summary of Contents for SY-PA500
Page 1: ......
