ArTi WH FLAT 50-100L, Instructions For Use Manual

Page: 21 / 34

arti.ua 21
EN
GUARANTEE:
1. The warranty is valid only if the warranty
card is completed correctly.
2. The warranty period is valid from the date
of purchase.
3. The warranty card is designed for domestic
hot water appliances. Compliance with the
instructions in the manual of the device is part
of the warranty conditions.
4. Installation and wiring must be carried out
by a qualified technician in compliance with
all
conditions and regulations. It is
recommended that this be done with an
authorized service center. The service is paid
by the customer. (Valid for devices that
require installation and connection).
5. All claims must be made upon purchase.
6. Complaints about transport defects are not
accepted after the unit was purchased and
left the territory of a retail store.
7. Maximum number of repairs is not set to
replace the device. If the unit is replaced by a
new warranty period it is valid under the
conditions of the first purchased the
appliance.
Costs of dismantling,
transportation and installation are performed
by the client.
8. The risk of damage during transport to and
from the service base will be charged to the
customer.
9. Warranty service does not include a device
for periodic maintenance of the instrument,
cleaning and changing supplies.
10. All consumables are not included in the
warranty (parts removable from the main
body, parts wear out quickly, all glass, rubber
and plastic parts located on the outer sides of
the device).
11. Visit service representative on request
must be paid by the customer, if there is no
defect, or established that the warranty
conditions are violated due to failure to follow
instructions.
12. If there is a replacement of the device
(when repair work is not the solution), it must
be returned with all accessories that were
purchased. Otherwise, the replacement may
be denied.
WARRANTY SERVICE WILL BE DENIED
THE FOLLOWING CASES:
1. Warranty conditions are not met.
2. In an attempt to repair by unauthorized
personnel or authorized service. If parts are
not approved by the manufacturer are used
for repair. If the design changes made
instrument.
3. If you do not meet the conditions of the
installation and operation
4. In case of damage due to natural disasters,
surge in the electrical system, the non-
standard voltages, transport and also
mechanical damage on the unit and
accessories.
5. In case of damage due to dirt, lime, grease,
insects, rodents, etc.
6. In case of damage due to careless
handling.
7. In case of discrepancy between the data in
the documents and the goods or attempts to
forge or alter itself guarantee.
8. Violation, modify or delete individual
labels, posters or stickers containing model
and / or serial number.