ARTHUR MARTIN AW6S7054AW, User Manual

Page: 11 / 64

DIAL AND BUTTONS
Introduction
The options/functions are not
available with all washing
programmes. Check the
compatibility between options/
functions and washing
programmes in the
"Programme Chart". An option/
function can exclude another
one, in this case the appliance
doesn't allow you to set
incompatible options/functions.
Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature. Touch this button
repeatedly until the indicator of the desired
temperature value comes on.
When the indicator comes on, the
appliance does not heat the water.
Essorage
With this option you can change the
default spin speed. The indicator of the set
speed comes on.
Additional spin options:
• Decrease the spin speed.
• No Spin . The related indicator
comes on.
Set this option to deactivate all spin
phases. The appliance performs only
the draining phase of the selected
washing programme. Set this option for
very delicate fabrics. The rinse phase
uses more water for some washing
programmes
• Rinse Hold . The related indicator
comes on.
The final spin is not performed. The
water of the last rinse is not drained out
to prevent the fabrics from creasing.
The washing programme ends with
water in the drum.
The door stays locked and the drum
turns regularly to reduce creasing. You
must drain the water to unlock the door.
If you touch the Départ/Pause
button, the appliance performs the
spinning phase and drains the water.
The appliance empties the
water out automatically after
approximately 18 hours.
Prélavage
With this option you can add a prewash
phase to a washing programme.
The relevant indicator illuminates.
• Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for heavily
soiled laundry, especially if containing
sand, dust, mud and other solid
particles.
This option can increase the
programme duration.
Départ Différé
With this option you can delay the start of
a programme to a more convenient time.
Touch the button to set the required delay.
The programme can be delayed by 9, 6 or
3 hours.
The indicator of the option and the
indicator of the set value are on.
Rinçage Plus
With this option you can add a few rinses
according to the selected washing
programme. The corresponding indicator
illuminates.
Use this option for people with allergies to
detergent residues and with sensitive skin.
This option increases the
programme duration.
11