10
INSTALLATION INSTRUCTIONS
Rise installation guide
1.- The first step is to mark the 4 points
required to fix the x4 screws.
Please note that an alternative fastening
x may be required depending on the
wall’s material.
Drill the holes and place the screws
according to the hole diameter as
described in the General Dimensions
document.
2.- To hang the monitor, place onto the
wall and align it with the screws, making
sure the monitor fits onto them, then
slide it carefully down.
3.- To make the connections the
central cover must first be removed (as
shown). Next the cables can be passed
through the openings on the cover (or
by removing the punch out holes, and
passing them through there).
Then the screws underneath the
monitor can be tightened to keep the
monitor securely in place on the wall.
