30
AHlink
AHlink is used to control and set-up the unit.
By default, the AHLink wireless signal is deactivated. To activate it for
the DynamicX2, please press and hold the Open and Close buttons
simultaneously on the cover plate for 5 seconds.
To activate the AHlink signal for the DynamicTalk, press during 2 seconds
the Up and Down microphone button located on cover plate, or
contact close GPI2 pin to GND during 2 seconds. When the AHlink signal
is activated, it sounds 5 beeps inside the unit to indicate that the AHlink
signal is active.
You can also activate the AHlink
signal with the LCD (Interactive
Setup Display) located under
the monitor. Press the Down key
near the LCD (Interactive Setup
Display), until the "<AHlink>"
option appears. Press the OK
button to activate the AHlink
signal on the unit. When the
AHlink signal is activated, the
sound of 5 beeps will indicate
that the AHlink signal is active on
the unit.
The wireless AHLink signal
automatically deactivates when
there is no device connected
during more than 2 minutes.
When the AHLink deactivates,
you will hear a long Beep sound.
To control and set up your AH
product with AHLink, please
download it from the App Store
(IOS system) or from Google Play
(Android system) and execute it
in your handled device.
It is recommended on to select Auto Connect and select Portrait on
Orientation. To connect it, select Scan for local devices.
