15
INPUT CONNECTORS
MICROPHONE INPUT CONNECTORS
AHnet: RJ45 CAT5 connector for addressable RS422 control. There is a
loop through connector to use as signal RS422 output. You can connect
up to 30 devices on the same RS422 bus.
AHnet ADDRESS: Using the AHnet protocol, this is the number of the
device into the RS422 addressable bus.
TERM OUT: Brighting when the RS422 bus termination is active. Active
only the RS422 bus termination on the last unit of the bus.
RX: Brights when the unit receives a RS422 AHNet command.
OSD – OK +
-
Changing AHnet Address. Press OK button. Change the AHnet number
address using + and – keys, and press OK to save the new address
-
RS422 bus termination. Press + key to activate the RS422 termination.
Press – key to deactivate the RS422 termination
