29
AHLink
AHlink is used to control and set-up the unit.
By default, the AHlink signal on the unit is deactivated. To activate the
AHlink signal, press for 5 seconds the external Up and Down screen
buttons located on the top monitor frame or press for 5 seconds the UP
and Down contact close on the GPI connector. You can also activate
the AHlink signal with the LCD (Interactive Setup Display) located under
the monitor. Press the Down key near the LCD (Interactive Setup Display),
until the "<AHlink> ¨option appears. Press the OK button to activate
the AHlink signal on the unit. When the AHlink signal is activated, the
sound of 5 beeps will indicate that the AHlink signal is active on the unit.
The wireless AHlink signal automatically desactivates when there is
no monitor connected during more than 2 minutes. When the AHlink
desactivates, you will hear a long Beep sound.
To control and set up your AH
product with AHlink, please
download it from the App Store
(IOS system) or from Google Play
(Android system) and execute it
in your handled monitor.
It is recommended on to select
Auto Connect and select Portrait
on Orientation. To connect it,
select Scan for local monitors.
