10
CONTROLS
Remote control
POWER
Switch ON/OFF the monitor
MENU
Activates the OSD menu on screen
UP
Cursor control up on the OSD menu
DOWN
Cursor control down on the OSD menu
LEFT
Cursor control left on the OSD menu
SEL
Selects the function on the OSD menu
SOURCE
Selects the input source signal
Monitor address
Below the monitor, there is a screen to set-up the monitor. Press the UP
or DOWN buttons to change the function. Press the OK button to select
the function. Change the parameter using the UP or DOWN buttons
and press OK again to save the changes.
AHNET ID
Selects the number AHnet ID to RS422 to externally
control the monitor
INPUT SELECT Selects the input source signal (HDMI1, HDMI2, DP1, DP2)
BRIGHTNESS
Configuration of the monitor brightness level
CONTRAST
Configuration of the monitor contrast level
BACKLIGHT
Configuration of the monitor backlight level
STATUS INFORMATION List of the monitor status to service
