11
ASSEMBLING GUIDE
Mounting table brackets
Please, use the template included in the shipment to decide the monitor’s
position. The external dimensions iindicate the monitor area in contact
with the table top, plus 3 holes for the screws and a big one for cables.
Please note the correct side: “UP” in reading position.
When the holes are made in the table, you need to fix the M8 screws
without head until the end (x3). Please note the correct position of the
screws.
Then, place the monitor on the table and tighten from below the x3
hexagon nuts and connect. The device is ready!
