15
Input connectors
DVI 1/ DVI A
DVI-I input signal. Connect a DVI (digital) input signal and
select DVI 1 on the OSD monitor menu. Use a DVI to VGA
adapter to connect an ARGB (analogue) input signal and
select DVI-A on the OSD monitor menu
DVI 2
DVI-D input signal. Connect a DVI (digital) input signal and
select DVI 2 on the OSD monitor menu
- Use high quality DVI cables with 2m maximum length
12V D.C.
Power supply input connector. XLR-4 connector:
1,2: Ground
3,4: 12Vdc
GPI
Monitor external contact close control. SubD9 female
1.
GPI1 +
2. GPI1 –
3. GPI2 +
4. GPI2 –
5. GPI3 –
6. GPI3 +
7. N.C.
8. +12Vdc (600mA max.)
9. Ground
- Use GPI1 (1:12Vdc, 2:Ground) to open the monitor
- Use GPI3 (6:12Vdc, 5:Ground) to close the monitor
Termination
Activate (ON) the termination, ONLY on the last unit of the
RS422 bus
AHnet
RJ45 CAT5 connector for addressable RS422 control. There
is a loop through connector to use as signal RS422 output.
Up to 30 monitors can be connected on the same RS422 bus
Service
Used for firmware upgrade
