ArtFox SKY BEAM 9R, User Manual, Page: 5 / 16

equipments, clamps, wirings and other additional fixtures.

Screws for clamping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to
clamp bracket, and then screw the nuts.

Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the
two levers by 1/4 rotating clockwise; then install

Install on safety string which stands at least ten times weight as equipment. Terminal of the
accessory is designed for clamps.

Make sure pan/tilt lock unlocked or not. Keep the distance more than 1M from equipment to
flammable material or lighting source.
Page 5
equipments, clamps, wirings and other additional fixtures.
mping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to
clamp bracket, and then screw the nuts.
Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the
two levers by 1/4 rotating clockwise; then install another clamp.
Install on safety string which stands at least ten times weight as equipment. Terminal of the
accessory is designed for clamps.
Make sure pan/tilt lock unlocked or not. Keep the distance more than 1M from equipment to
ighting source.
Figure 2 Installation
mping must be fixed firmly. Take one M12 screw (Grade 8.8 or higher) to
Level the two hanging points at the bottom of clamp. Insert fastener to the bottom, lock the
Install on safety string which stands at least ten times weight as equipment. Terminal of the
Make sure pan/tilt lock unlocked or not. Keep the distance more than 1M from equipment to