6
light, circuit board has a 3AT fuse. If the fuse has blown, it need
replaced by professional. Computer light also have two heat
protectors, they should cut off power supply when the temperature is
too high. If it happened, fan should be checked whether there is a
barrage or not. If fan is dirty, please switch on the power supply after
clean it. Examine operation of fans, if it doesn’t work, please mend it
by professional.
6.
Cleanly maintenance
In order to computer light operate steadily, it should keep clean.
Suggest clean lighting body and fan every 15 days. Lens and dichroic
filter should be cleaned at stated time to assure the best light effect.
Don’t use any deliquescent cleaner to clean dichroic filter.
7.
Warning
Don’t dismounting or refit computer light.
Don’t touch water and other kind of liquid and metal substance
(IP20).
Don’t install in a high wettest condition.
Don’t illuminate on tinderbox, computer light must keep 5M away
from tinderbox.
Computer light should keep 0.5M away the surface of adjacent
object.
Don’t look beam in the face, or it may injure your eyes.
Notice: modulator tube will reach to a high temperature when it
works. It must be completely cool at least 15 minutes before operate
again.
8.
Difficulty disposal
Problem
The way to solve
Computer light can’t start.
Check fuse of back-panel.
Though it shine, computer light
don’t accept dictate of control.
Check data startup address (see
section 5), and check connection
of communication control line
