12
PowerON--> Turn on the lamp when power on.(
Default
)
RstDone--> Turn on the lamp after reset.
Manual--> Manually turn on the lamp.
◆
Data hold:
OFF--> When no DMX signal, return to middle position.(
Default
)
ON--> When no DMX signal, stop in the final position.
◆
Factory Setting:
Restore all parameter to factory setting.
2.3.6 STAT-->Status: View status
Enter the page as shown in Figure 12:
Figure 12 page of status
◆
Work Mode:
Show the current working mode.
◆
Address:
Show the current address.
◆
Version:
Show the version of the light.
◆
Elapse:
Working hours after turning on.
◆
Tatol:
Cumulative hours of operation
When <Data hold> set <ON>,click to
clear DMX data, and make the lamp
return to the middle position.
Click to reset.
