Artesis AMT Toolkit, User Manual

Page: 19 / 78

AMU Use
17
ENTER will initiate the reset. Pressing any other button will cause the reset to be ignored
and the device will continue.
3.3.2. Entering the password
To configure the unit, select the Edit Settings mode and press and confirm ENTER. In order
to proceed further, it will be necessary to enter a password.
NOTE
The factory setting for this password is the string
“m“and can be entered using the UP and DOWN
buttons to cycle through the alphanumeric characters
(‘a’ through ‘z’, ‘0’ through ‘9’).
The LEFT and RIGHT buttons are used to shift the active character in the string. To input the
password “m”, repeatedly press the UP button until the letter ‘m’ appears in the first
position. Press and confirm ENTER and then press ENTER again to enter the Edit Settings
menu.
3.3.3. The Edit settings menu
Throughout this manual, paths to menu items are represented by the word MENU:
followed by the list of sub-menus required to reach the item separated by a forward slash.
For example, the path of the Parity value given in the preceding paragraph would be given
as:
MENU: Edit Settings / Password / Comm. Settings / Parity
The forward slash can be thought to represent the action of pressing and confirming ENTER.
3.3.3.1. First time use
Before AMU can be used for the first time it is necessary to change various settings from
their default values. Values relevant to the connected motor must be set for the quantities
described in the following sections.