background image

19

.  

 

Jet 5/Select Button:

Once the operation is highlighted press the Select button, to ingage the 
highlighted item.

Icons and operation of the icons when highlighted and the select button 
is pressed.

 Back button: Will return you to the main menu

 

 Jets 1: First press of the Select button will activate pump 1 

(if pump is not currently on).  A second press of the Select button will de-
activate pump1.  If pump1 is not manually turned off by pressing the Select 
button it will automatically timeout after 15 minutes.

 

Jets 2: First press of the Select button will activate pump 2 

(if pump is not currently on).  A second press of the Select button will deac-
tivate pump 2.  If pump 2 is not manually turned off by pressing the Select 
button it will automatically timeout after 15 minutes.

Jets 3: First press of the Select button will activate pump 3 

(if pump is not currently on).  A second press of the Select button will deac-
tivate pump 3.  If pump 3 is not manually turned off by pressing the Select 
button it will automatically timeout after 15 minutes.

 Jets 4: First press of the Select button will activate pump 4 

(if pump is not currently on).  A second press of the Select button

SPA OPERATION

Summary of Contents for PLATINUM ELITE













































































Reviews: