F
G
Ø2.75
10mm
Ø6
E.1
E.2
E.3
E.1
Place the wall profiles onto the enclosure.
Position the enclosure onto the tray. Ideally the
enclosure should be positioned 10mm from the
edge of the tray as shown. Centralize the
enclosure onto the tray top rim and position
vertically plumb using a spirit level
.
E.2
Mark the position for fixing the wall profile using
a pencil or a water soluble pen as shown.
E.3
Remove the enclosure then drill the holes to
the wall using
Ø6
drill bit as shown.
E.4
Insert the wall plugs into the wall holes. Then
Secure the wall profile using ST3.5 x 30 screw
.
TOP ROLLER
BOTTOM ROLLER
I
The top and bottom rollers
MUST
be
placed in their correct positions i.e.
top and bottom, otherwise the door
will not function correctly and could
lead to excessive wear and tear.
11
12
E
H
9
E.4
1
8
7
Drill 3 equally spaced holes with a 2.75mm drill bit through the wall profiles and frame.
Fix the frame to the wall profiles using screws 4x12
G
H
