Artens 3276007175561, Instruction Manual

Page: 34 / 36

34
FR
ES
PT
IT
EL
PL
UA
RO
ZA
3. ASSEMBLY
3.1 UNPACKING
• Do not use any sharp tools (cutter, knife,...) when unpacking, you could damage the product.
3.2 INSTALLATION
Before starting your work, please consult local authorities in case permits are required for the installation
of the product.
Assemble the individual components together as shown in the illustration. If a screw is required, tighten
it with a suitable tool.
To avoid any risk of damage and to ensure an optimum seal, we recommend that you seal with standard
silicone paste.
After assembly, we recommend cleaning the product with soapy water and rinsing with fresh water.
4. STORAGE
4.1 PRODUCT STORAGE
This product must be stored away from moisture and rising humidity, i.e. in a dry room (heated if
necessary).
The product must be protected from frost and wind.
5. MAINTENANCE
5.1 CLEANING
remove dirt from the net.
We recommend the following steps:
2. For some models, you will need to remove the net from the frame before placing it in a container of
soapy water.
4. Turn the net over and repeat the operation.
5. Wipe gently with a soft towel.
6. WARRANTY
6.1 OUR GUARANTEE
ARTENS products are designed according to the highest quality standards for products intended for the
consumer market. This after-sales warranty covers a period of 2 years from the date of purchase of the
product. This warranty covers all defects in parts and workmanship: missing parts and components as
well as damage occurring under normal conditions of use. Repairs and changes of parts do not extend
the original warranty period. You must be able to provide proof of purchase of this product and the date
of purchase. Warranty coverage is limited to the value of the product.
6.2 DISCLAIMERS OF WARRANTY
This warranty does not cover problems or incidents resulting from improper use of the product. The
following items are not covered by the warranty:
- The product has been used improperly; or
- Damage occurring during transport or installation of this product; or
- Repairs and/or changes to parts made by a third party; or
- Damage resulting from non-compliance with the safety and operating instructions; or