Artemis BP00707, User Manual

Page: 17 / 72

17
3.10 Connecting the USB Lead
To upload new “Mission” files onto Artemis, or download recorded “Dive Log” data, use
the USB lead connect the Artemis display to a PC…
 Power down Artemis, and plug the USB lead into the USB connector at the base of
the console.
 Connect the other end of the lead into a free USB socket on a PC / Laptop that has
the “Artemis Manager” software installed.
 Turn Artemis on and after a short time the Windows™ operating system should
detect Artemis, and appear as a “Mass Storage Device” (similar to a USB pen-
drive).
 Use the Windows File Explorer (or other file manager) to copy any Mission files onto
the internal flash storage of the Artemis Display, or download and remove any Dive
Log files.
Please note that on some systems, the USB detection time can take up to several
minutes if the computer needs to find and download the appropriate Mass Storage
Device drivers from Microsoft.
To prevent corruption to any of the files, always follow the “Safely Remove
Hardware & Eject Media” procedure required for the Windows operating
system being used, before disconnecting the USB cable or powering-down
Artemis.
For further details on working with Artemis Mission and Dive Log files, please refer to
section “Mission & Dive Log Files” on page 32.