Page 18
Remotely Control Scan Do® SD
Remotely Control Scan Do® SD
Control via Ethernet
Zoom Controls
This will Zoom your output to full screen and will not maintain the aspect ratio.
This will use 4:3 Center Cut Zooming, used when the output format
is 4:3 (Standard Definition) and the input is 16:9
This will render your image geometrically correct in the output raster.
Use these buttons for coarse increments.
Use these button for fine increments.
GUI Configuration
The GUI Configuration dialog box allows you to add and remove functionality
from the GUI interface. This is useful when you wish to hide functionality
from users of the GUI interface and to avoid accidental changes to important
properties.
Note:
The Scan Do SD does not employ rights management. A user can connect
to the GUI, enable a feature and change its properties.
If you wish to restrict GUI access to specific users and/or groups, your IT
department may be able to help. Ask them about IP to IP restrictions, rights and
pools that can be enabled within your LAN’s router.
