Page 8
FiberLink 3390 Series User’s Manual
FiberLink 3390Series
Operating Loss Budget
Single Mode Fiber
0-14 dB at 2 .97 Gbps
0-16 dB at 1 .485 Gbps
0-16 dB at 270 Mbps
Multimode Fiber (62 .5u)
0-14 dB at 2 .97 Gbps
0-16 dB at 1 .485 Gbps
0-16 dB at 270 Mbps
Multimode Fiber (50u)
0-14 dB at 2 .97 Gbps
0-16 dB at 1 .485 Gbps
0-16 dB at 270 Mbps
Maximum Useable Distance
Single Mode Fiber
30 km at 2 .97 Gbps
40 km at 1 .485 Gbps
40 km at 270 Mbps
Multimode Fiber (62 .5u)
0 .8 km at 2 .97 Gbps
1 km at 1 .485 Gbps
2 .5 km at 270 Mbps
Multimode Fiber (50u)
1 km at 2 .97 Gbps
1 .3 km at 1 .485 Gbps
3 km at 270 Mbps
*Distance specifications are approximate, based upon connecting a 3390 Transmitter to a 3391 Receiver, and are not guaranteed .
Artel cannot estimate or guarantee operating loss budgets when the 3390 Series is used with other, non-Fiberlink devices .
Operating loss budget must not be exceeded
Operating Loss Budget | Maximum Useable Distance
The FiberLink 3390 Series of fiber optic transmission systems are ready for
immediate use and do not require any special tools or equipment .
The following instructions describe the typical installation procedure:
1) Connect the video source to the video input BNC connector on the transmitter unit .
2) Connect the video output cable to the video output BNC connector on the
receiver unit .
3) Configure the audio and data preferences as described in the appropriate sections
of this manual .
4) Connect the data connections as described in the Data Wiring section of this manual .
5) The Ethernet port is configured as an MDI port . If you are
not
connecting
the 3390 Series to an auto-crossover Ethernet port, you may need to use the Ethernet
crossover cable supplied with the unit to connect to another MDI port .
6) Connect the audio wiring as described in the Audio Wiring section of this manual .
Installation Instructions
